ORCA-Fusion Digital CMOS camera C14440-20UP
The ORCA-Fusion, built from the sensor up, balances the complex nuances of camera features to provide beautiful images and robust data at all lights levels, but especially in tough low-light conditions. The exceptionally low and highly uniform read noise of the ORCA-Fusion means that when the sample emits even just a handful of photons, either by default or by experimental design, they are not lost in the noise, but detected and reliably quantified. After all, when you want to hear a whisper it’s best to be in a quiet place.
Special sites
The life science camera section is the feature section for digital cameras fit to life science research and industry areas.
Features
- High resolution : 2304 x 2304 (5.3 Megapixels)
- High speed : 100 frames/s (at 2304 X 2048 ROI)
- Dynamic range : 21,400:1
- Pixel size : 6.5 μm X 6.5 μm
- Read noise : 0.7 electrons, rms (Ultra-quiet Scan)
- Prnu : 0.06 % rms (@ 7500 electrons)
- DSNU : 0.3 electrons rms
- Peak QE : 80 %
- Patented Tools for Advanced Imaging: Lightsheet Readout Mode
PC recommendations
With the introduction of the ORCA-Fusion, users are now able to stream 5 megapixel images to their computers 89 frames per second. The computer recommendations for this high data rate can be met by using the guidelines listed this PC Recommendations for ORCA-Fusion.
Specifications
| Type number | C14440-20UP |
|---|---|
| Quantum efficency | @ 400 nm: 65 % *1@ 550 nm: 80 % *1@ 700 nm: 70 % *1@ 800 nm: 50 % *1 |
| Imaging device | sCMOS |
| Effective no. of pixels | 2304(H)×2304(V) |
| Cell size | 6.5 μm(H)×6.5 μm(V) |
| Effective area | 14.976 mm (H)×14.976 mm (V) |
| Full well capacity | 15 000 electrons *1 |
| Readout speed | Fast scan: 11.22 ms (89.1 frames/s with CoaXPress or 31.6 frames/s with USB 3.0) (2304 x 2304) *4 Standard scan: 42.99 ms (23.2 frames/s with CoaXPress or USB 3.0) (2304 x 2304) *4 Ultra-quiet scan: 184.4 ms (5.4 frames/s with CoaXPress or USB 3.0) (2304 x 2304) *4 |
| Readout noise | Fast scan：1.4 electrons rms *1 Standard scan：1.0 electrons rms *1 Ultra-quiet scan：0.7 electrons rms *1 |
| Exposure time | Fast scan: 17 μs to 10 s (4.87 μs step) Standard scan: 65 μs to 10 s (18.65 μs step) Ultra-quiet scan: 280 μs to 10 s (80.00 μs step) |
| Cooling method | Peltier cooling |
| Cooling temperature | Forced-air cooled: -5 ˚C (Ambient temperature: +25 ˚C) Water cooled: -5 ˚C (Water temperature: +25 ˚C) Water cooled (Max cooling): Less than -15 ˚C *1,*8 |
| Dark current | Cooling temperature(-5 ˚C): 0.5 electrons/pixel/s *1,*3 Cooling temperature(-15 ˚C): 0.2 electrons/pixel/s *1,*3 |
| Dynamic range | 21 400 : 1 *1,*2 |
| External trigger mode | Edge, Level, Sync readout, Start, Global reset edge, Global reset level |
| External trigger signal routing | SMA |
| Trigger delay function | 0 s to 10 s in 1 μs steps |
| Trigger output | Global exposure timing, trigger ready, low, high |
| External signal output routing | SMA |
| Interface | CoaXPress (Dual CXP-6) and USB 3.0 *6 |
| A/D converter | 16 bit *5 / 12 bit / 8 bit |
| Lens mount | C-mount *7 |
| Power supply | Approx. 150 VA *9 |
| Ambient operating temperature | 0 ˚C to + 40 ˚C |
| Ambient operating humidity | 30 % to 80 %, with no condensation |
*1 Typical value *2 Calculated from the ratio of the full well capacity and the readout noise *3 Dark current depends on cooling temperature *4 Valid to 4 digits and rounded up to 5th digit *5 With standard scan, A/D = 14 bit + 2 bit for linearity correction *6 USB 3.1 Gen 1 compatible *7 F-mount (C14440-20UP01) *8 The water temperature is +20 ˚C and the ambient temperature is +20 ˚C *9 The value with AC 240 V. (Approx. 70 VA with AC 100 V)
Spectral response
Dimensions
